Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio in the Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will see how to remove the car radio in the Toyota Yaris, a very simple and quick operation. First, ensure that the key is not inserted for safety.

Then, use a plastic spatula to unclip the two side panels of the centre console and remove the trim. Once done, undo the 4 mounting bolts of the car radio, pull it towards you, and extract it from the housing, disconnecting all the rear connectors.

To install the replacement, simply follow the same procedure in reverse.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio in a Toyota Yaris
How to Replace the Car Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replacing the car radio in a Toyota Yaris is a fairly simple task to do yourself. To perform this operation, remove the hard plastic cover around the…
How to remove the factory radio of the Toyota Yaris
How to remove the factory radio of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today we will discover the steps that will allow us to disassemble and replace the standard radio of the Toyota Yaris. First, we get into the car and…
Removing the Radio from a Toyota Yaris
Removing the Radio from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replace the radio in a Toyota Yaris if it is damaged or worn out. Let's look at the disassembly. Remove the ventilation knobs and take off the coveri…

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos