Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Disc on the Toyota Verso?

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Brake rotors

To replace the rear brake disc on the Toyota Verso, lift the vehicle so that the corresponding rear wheel is off the ground. At this point, remove the bolts securing the wheel and take it off completely to access the components at the back. Then, unscrew the bolts securing the caliper, detach it from the disc, and remove the bolts holding the disc in place. The old disc can now be taken out and replaced with a new part; finally, reassemble all the removed components.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on a Toyota Verso
How to Adjust the Handbrake on a Toyota Verso
Toyota Verso (2009-2018 / MK 4) You can adjust the handbrake on a Toyota Verso by removing the cover located at the rear of the corresponding lever: once this panel is removed, you …
Replacing the Bulbs in the Rear Headlamp on a Toyota Verso
Replacing the Bulbs in the Rear Headlamp on a Toyota Verso
Toyota Verso (2009-2018 / MK 4) Are the rear headlamp bulbs blown? Let’s see how to replace the bulbs in the rear headlamp of a Toyota Verso. Open the rear hatch of the car, then re…
How to Replace the Bulb of the Rear Headlight of the Toyota Corolla Verso
How to Replace the Bulb of the Rear Headlight of the Toyota Corolla Verso
Toyota Verso (2004-2009 / MK 3) Today's guide will show you how to remove and replace the bulb of the rear headlight of the Toyota Corolla Verso by following the instructions below.…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos