Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Verso
  6. : Replacing the rear light bulbs on Toyota Verso

Toyota Verso - Video tutorial

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Rear light bulb
Operation: Replacing the rear light bulbs on Toyota Verso

Burnt out rear light bulbs? Let's see the replacement of the rear light bulbs of a Toyota Verso. We open the tailgate of the car, then, we remove the plastic luggage compartment cover. We detach the lamp holder located in the rear light, extract the damaged bulbs (we mount the bulbs of the same size and voltage) and mount the new ones. We mount the lamp holder inside the lighthouse and hook it. We cover the luggage compartment with the plastics of the upholstery. We turn on the rear lights with the buttons located above the levers / ignition knob.


Posted on 29 November 2023 by ScegliAuto



Toyota Verso rear light bulb replacement
Toyota Verso (2009-2018 / MK 4) Burnt out bulbs on our Toyota Verso? Let's see the replacement of the headlight bulbs. Let's lift the front hood, let's put it in safety. We remove t
How to replace the rear light bulb of the Toyota Corolla Verso.
Toyota Verso (2004-2009 / MK 3) Today's guide will show us how to disassemble and replace the rear headlight bulb of the Toyota Corolla Verso, following the instructions below. Firs
Replacement of the rear light bulbs of the Toyota Verso.
Toyota Verso (2004-2009 / MK 3) When one of the rear lights of the Toyota burns out, for our safety we must proceed as soon as possible with the replacement. We open the rear door a

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos