Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Prius C Aqua
  6. : How to clean the battery terminals of the Toyota Prius C Aqua?

Toyota Prius C Aqua - Video tutorial

Model: Toyota Prius C Aqua MK 1 - Years 2011-2021
Part: Checks and maintenance
Operation: How to clean the battery terminals of the Toyota Prius C Aqua?

Not everyone knows that there is a very simple way to keep the battery cell terminals on the Toyota Prius C Aqua clean and efficient without spending a lot of money on special products. The maximum cost for what we need is in fact 2-3 euros as the only object we need is an abrasive sponge. It must be said that only a small piece of it is needed, therefore a single sponge can be used for many cleaning cycles. All we have to do to keep the terminals clean is to rub them regularly with a piece of this particular sponge in order to eliminate any dirt and traces of oxidation.


Posted on 11 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos