Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Timing Belt Maintenance Light on the Toyota Fortuner?

Model: Toyota Fortuner An50, An60 - Years 2005-2015
Part: Warning light – error code

In this tutorial, you will see how to remove the timing belt light on the Toyota Fortuner, a very simple and quick operation. Before doing this, make sure you have completed all required maintenance tasks. Start by entering the cabin and turning on the ignition, then, using the button on the speedometer, switch the display to the "ODO" option. Once you have done this, turn off the ignition and turn it back on while holding the same button, releasing it when the screen changes. At this point, just adjust the interval and save the setting.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Light on the Toyota Fortuner?
How to Reset the AdBlue Light on the Toyota Fortuner?
Toyota Fortuner (2015-2024 / An160) The AdBlue light that appears on the instrument cluster of the Toyota Fortuner indicates that the additional fluid in the designated tank is almost c…
How to Replace the Serpentine Belt on a Toyota Fortuner?
How to Replace the Serpentine Belt on a Toyota Fortuner?
Toyota Fortuner (2015-2024 / An160) To replace the serpentine belt on a Toyota Fortuner, open the hood to access the components on the right side of the engine block: here you will find…
How to Replace the Serpentine Belt on a Toyota Fortuner?
How to Replace the Serpentine Belt on a Toyota Fortuner?
Toyota Fortuner (2015-2024 / An160) To replace the serpentine belt on a Toyota Fortuner, open the hood to access the components on the right side of the engine block. Here, you will fin…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos