Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Toyota Fortuner?

Model: Toyota Fortuner An160 - Years 2015-2024
Part: V-belt

To replace the serpentine belt on a Toyota Fortuner, open the hood to access the components on the right side of the engine block: here you will find the pulleys around which the serpentine belt is routed. By loosening the nut that secures the tensioner pulley, you can reduce the tension and remove the belt completely from its housing. At this point, position the new belt around the pulleys and secure it with the central nut and bolt. Then, start the engine and ensure everything is functioning properly.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on a Toyota Fortuner?
How to Replace the Serpentine Belt on a Toyota Fortuner?
Toyota Fortuner (2015-2024 / An160) To replace the serpentine belt on a Toyota Fortuner, open the hood to access the components on the right side of the engine block. Here, you will fin…
How to Reset the Timing Belt Maintenance Light on the Toyota Fortuner?
How to Reset the Timing Belt Maintenance Light on the Toyota Fortuner?
Toyota Fortuner (2005-2015 / An50, An60) In this tutorial, you will see how to remove the timing belt light on the Toyota Fortuner, a very simple and quick operation. Before doing this, make…
Where is the fuse box of the Toyota Fortuner located?
Where is the fuse box of the Toyota Fortuner located?
Toyota Fortuner (2015-2024 / An160) In the following guide aimed at all of you who own a second-generation Toyota Fortuner, we will describe all the steps you need to take if you intend…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos