Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout for the Toyota Yaris?

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Fuse box

See other generations:
Video tutorial

In this video, you can see the location of the fuse boxes and their respective layouts in the Toyota Yaris, useful if a device is malfunctioning and you want to check its fuse. As shown, the first box is located inside the cabin, beneath the dashboard on the driver's side.

The second box is located in the engine compartment, under the black cover next to the battery. In case of a blown fuse, ensure you use a replacement with the same amperage and always operate with the vehicle turned off to avoid any damage.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

Fuse layout and positioning for the Toyota Yaris
Fuse layout and positioning for the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The information provided in this guide will allow you to access the fuse boxes of the Toyota Yaris, retrieving the layout and diagram. First, open th…
Fuse Diagram and Schema for the Toyota Yaris
Fuse Diagram and Schema for the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's instructions will illustrate the positioning of the fuse boxes in the Toyota Yaris, retrieving the schema and diagram of the fuses. First, op…
Fuse Positioning and Diagram for the Toyota Yaris
Fuse Positioning and Diagram for the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This guide will show you the positioning and diagram of the fuses for the Toyota Yaris, in simple steps. First, open the bonnet of the vehicle and lo…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos