Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Yaris Sedan
  6. : Toyota Yaris rear axle bearing replacement

Toyota Yaris Sedan - Video tutorial

Model: Toyota Yaris Sedan Xp90 - Years 2005-2013
Part: Bearing
Operation: Toyota Yaris rear axle bearing replacement

To replace a rear wheel bearing on a Toyota Yaris sedan it is necessary to proceed as follows: remove the rim and remove the rear brake drum. Using a socket wrench, unscrew the four bolts that secure the brake unit to the axle, taking care not to damage the brake. Use a lubricant to facilitate the extraction of the bearing assembly from the brake and pull the bearing outwards until it is completely extracted. Take the new bearing and insert it on the brake, after which, reposition the brake unit plus bearing and fix the four bolts again, perhaps after replacing them, finally reassemble the rim with the tire.


Posted on 24 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos