Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Main Fuse Box of the 2018 Toyota 4Runner

Model: Toyota 4runner N280 - Years 2010-2024
Part: Fuse box

Knowing the exact location of the main fuse box in your 2018 Toyota 4Runner is very important as it allows you to safely and directly access many components of the vehicle. It only takes a few seconds to find it. First, turn off the vehicle and disconnect the battery if you plan to work on the fuses themselves. Next, lift the hood and locate the fuse box on the right side of the engine compartment. Finally, remove the protective cover of the fuse box, and you will have access to the fuses.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located in the Toyota 4Runner?
Where Are the Fuses Located in the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In the Toyota 4Runner, the fuses are divided between two fuse boxes located inside the vehicle. The first box is positioned in the cabin, on the lowe…
Where are the fuses located in the Toyota 4Runner?
Where are the fuses located in the Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) The fuses in the Toyota 4Runner are located inside the designated fuse boxes within the vehicle. The first is positioned inside the cabin, on the low…
Where to Find the Fuse Box in the Toyota 4Runner
Where to Find the Fuse Box in the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) If you are experiencing issues with one or more electrical components in your Toyota 4Runner, don't worry because you can directly address them throu…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos