Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Toyota 4Runner?

Model: Toyota 4runner N280 - Years 2010-2024
Part: Battery

To replace the battery of a Toyota 4Runner, start by turning off the engine and make sure all electronic devices are turned off. Open the hood and locate the battery, usually located on one side of the engine compartment. Using a wrench, first loosen the negative cable clamp (marked with "-") and then the positive one (marked with "+"). Remove the bolts or supports that secure the battery in place and lift it carefully to avoid acid spills. Place the new battery making sure the poles are correctly oriented, then connect the cables in reverse order: first the positive pole and then the negative one. Finally, securely fasten the battery with the supports removed earlier and close the hood.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box in the Toyota 4Runner
Where to Find the Fuse Box in the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) If you are experiencing issues with one or more electrical components in your Toyota 4Runner, don't worry because you can directly address them throu…
How to Replace the Key Battery of the Toyota 4Runner
How to Replace the Key Battery of the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Replacing the key battery of the Toyota 4Runner is one of the simplest tasks you can do on your own without the help of a professional. Simply get a …
How to Replace the Battery in a Toyota 4Runner
How to Replace the Battery in a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) The video shows how to replace the battery in a Toyota 4Runner SUV. First, ensure the vehicle is off and open the hood using the lever located near t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos