Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : Where is the fuse box of the Toyota 4Runner located?

Toyota 4runner - Video tutorial

Model: Toyota 4runner N210 - Years 2002-2009
Part: Fuse box
Operation: Where is the fuse box of the Toyota 4Runner located?

If you are experiencing malfunctions in one or more electrical components in your Toyota 4Runner, don't worry because you can intervene directly through the appropriate fuses. In the following guide dedicated to you, we will discover where they are located and how you can access them. First, open the driver's side door and then remove the plastic protective panel located at the bottom of the dashboard. Next, locate all the various fuses in your Toyota 4Runner and you're done. Disconnect the car battery before working on the fuses.


Posted on 8 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 4runner 2010-2023 - Where is the fuse for the Toyota 4Runner cigarette lighter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos