Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Toyota 4Runner

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

Are you ready to replace the battery on this vehicle model? The description below contains all the useful instructions and the necessary procedure for a safe replacement. After opening the hood, you will find the battery on the left side of the compartment.

Proceed to loosen the mounting nuts on the crossbar above. Disconnect the negative terminal first, then the positive terminal.

Remove the battery and replace it with the new one, then reconnect the positive terminal first and then the negative terminal. Finally, reinstall the upper plate.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to replace the battery of a Toyota 4Runner key?
How to replace the battery of a Toyota 4Runner key?
Toyota 4runner (2010-2024 / N280) To replace the battery of a Toyota 4Runner key, start by separating the two halves of the key using a small screwdriver or a coin to pry open the slo…
How to replace the battery of the Toyota 4Runner
How to replace the battery of the Toyota 4Runner
Toyota 4runner (2010-2024 / N280) Today we will explain how to replace the battery of the fifth generation Toyota 4Runner. To replace the battery, we need to open the front hood and d…
How to replace the battery of a Toyota 4Runner?
How to replace the battery of a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) To replace the battery of a Toyota 4Runner, start by turning off the engine and make sure all electronic devices are turned off. Open the hood and lo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos