Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Toyota 4Runner key?

Model: Toyota 4runner N280 - Years 2010-2024
Part: Key

To replace the battery of a Toyota 4Runner key, start by separating the two halves of the key using a small screwdriver or a coin to pry open the slot. Once the key is open, you will find the battery inside. Take note of the type of battery (usually a CR2032) and carefully remove it. Insert the new battery into the same slot, making sure the polarity is correct, with the positive side facing up. After replacing the battery, close the key by aligning the two halves. Verify the correct functioning of the key by testing it on the vehicle.

Posted on 4 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Toyota 4Runner
How to replace the battery of the Toyota 4Runner
Toyota 4runner (2010-2024 / N280) Today we will explain how to replace the battery of the fifth generation Toyota 4Runner. To replace the battery, we need to open the front hood and d…
How to Change the Battery in a Toyota 4Runner
How to Change the Battery in a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) In this guide, you will learn how to replace the battery in a Toyota 4Runner. Start by opening the hood: you will find the battery on the right side …
How to Replace the Battery in a Toyota 4Runner?
How to Replace the Battery in a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) In this tutorial, you will see how to replace the battery in a Toyota 4Runner, a very simple and quick operation. First, ensure that the key is not i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos