Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Prius
    4. : How to reset the tire pressure warning light on the Toyota Prius

Toyota Prius - Video tutorial

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Instrument cluster
Operation: How to reset the tire pressure warning light on the Toyota Prius

This guide will explain the tire pressure warning light reset procedure for the Toyota Prius. The following tools are required for this procedure: pressure gauge, digital compressor with internal ideal pressure detector for inflating tyres, any instruction manual to check the factory parameters. The steps to be performed are, in order: 1. Check the pressure of the individual tires with a pressure gauge and check that there are no damages or any air leaks; 2. Compare the current tire pressures with those given in the car's owner's manual. If you don't have the manual at hand, simply inflate the tires to 33 PSI; 3. Start the instrument panel and check if the warning light is still present after these operations. If the warning light is no longer present, it means that the procedure was successful. If the warning light is flashing, there could be an electronic problem and it is therefore necessary to check the condition of the battery and/or alternator and replace them if necessary. If the warning light stays on but stays on, intervention by a specialized workshop is required.


Posted on 14 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Prius 2009-2015 - What to do when the red triangle light comes on on Toyota Prius? Read Answer
    • Prius 2016-2023 - What to do when the red triangle VSC warning light comes on on Toyota Prius? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos