Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard Instrument Cluster on Toyota Prius

Model: Toyota Prius MK 3, Xw50 - Years 2016-2023
Part: Instrument cluster

Today, we will see the instructions that will allow you to remove and replace the dashboard instrument cluster on the Toyota Prius. First, get inside the vehicle and start by removing the side plastic cover; then unscrew the fixing screws located on the side of the instrument cluster, subsequently disconnecting the electrical connectors located at the back, as shown in the video. At this point, repair or replace the instrument cluster with the new one, securely fastening it to the dashboard; finally, check its operation!

Posted on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on a Toyota Prius?
How to set the clock on a Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) To set the clock on a Toyota Prius, turn on the instrument cluster so you can use the controls located to the left of the central dashboard display: …
How to Reset the Tyre Pressure Light on a Toyota Prius?
How to Reset the Tyre Pressure Light on a Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) You can completely clear the tyre pressure light on the instrument panel of a Toyota Prius by turning on the instrument cluster, inserting the igniti…
How to Calibrate the Fuel Gauge on a Toyota Prius
How to Calibrate the Fuel Gauge on a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) To calibrate the fuel gauge on a Toyota Prius, press and hold the ODO TRIP button located on the central dashboard panel, just below the display. Whi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos