|
Do it yourself
| |||
| ||||
How to Replace the Wiper Blades on the Toyota Yaris
Model: Toyota Yaris
Xp10
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
If you notice that the effectiveness of the wiper blades on your vehicle has significantly decreased over the years due to wear, you need to replace them. You can find instructions on how to do this in this description and also refer to the video images. First, purchase a compatible wiper blade kit for your vehicle, then lift the wiper arm and release the fastening clip at the end of the arm to remove the blade. Take the new blade, attach it to the hook, and reattach the fastening clip. Lower the arm back down, resting the blade on the windscreen. Repeat the same procedure to replace the other blade.
Updated on 5 July 2026 by ScegliAuto
Related tutorials
Toyota Yaris
(2011-2019 /
Xp130)
In this video, you will see how to replace the wiper on a Toyota Yaris. To remove the wiper, first lift the wiper arm: then press the button or lever…
Toyota Yaris
(2011-2019 /
Xp130)
In this short video tutorial, you will see how to quickly remove and replace the rear wiper or rear screen wiper on the third generation Toyota Yaris…
Toyota Yaris
(2011-2019 /
Xp130)
If you own a 2017 Toyota Yaris and want to learn how to correctly replace the rear wiper blade, follow the steps outlined in this guide. First, park …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |