Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

See other generations:
Video tutorial

Changing the rear light on your Toyota Auris is not a difficult job. Locate the hidden cap in the boot trim. Underneath, there is a compartment that provides access to the wires, connectors, and screws holding the light assembly in place.

Pull out the wires, remove the connectors, and identify the screws securing the light unit. There are two: the first is a large central screw, from which you will remove the nut. The other is at the top of the light unit, higher up, and is a bit more difficult to reach.

Again, remove the nut here. Now you can take out the light unit to be replaced and repeat the process in reverse for installing the new light unit.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to remove the rear light from the Toyota Auris
How to remove the rear light from the Toyota Auris
Toyota Auris (2007-2012 / E150) Let's briefly go through the instructions that will allow you to remove and replace the rear light of the Toyota Auris, following these simple steps.…
How to disassemble the rear light and bumper of the Toyota Auris
How to disassemble the rear light and bumper of the Toyota Auris
Toyota Auris (2007-2012 / E150) Today we will discover the instructions that will allow us to disassemble and replace the rear taillight and bumper of the Toyota Auris. First, we op…
Removing the Rear Light on a Toyota Auris
Removing the Rear Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) In this video tutorial, you will learn how to remove the rear light of a Toyota Auris. First, open the boot lid and unscrew the two fixing screws loc…

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos