Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on a Toyota Auris

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear light of a Toyota Auris. First, open the boot lid and unscrew the two fixing screws located on the side of the light; then gently pry on the sides of the light and remove it, as illustrated in the video.

At this point, disconnect the electrical connectors of the bulbs to completely remove the light from the car: this allows for bulb replacement. Finally, reassemble the rear light by following the reverse procedure!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to disassemble the rear light of the Toyota Auris
How to disassemble the rear light of the Toyota Auris
Toyota Auris (2007-2012 / E150) In a few simple steps, we will see the process of disassembling and replacing the rear light and its bulbs of the Toyota Auris. First, we open the re…
How to Remove the Rear Light of a Toyota Auris
How to Remove the Rear Light of a Toyota Auris
Toyota Auris (2007-2012 / E150) To remove the rear light of a Toyota Auris, follow these steps. First, open the boot to access the inside of the light. You may need to remove the in…
How to remove the rear light of the Toyota Auris
How to remove the rear light of the Toyota Auris
Toyota Auris (2012-2018 / E180) Today we will explain how to remove the rear light of the Toyota Auris on your own. We start by opening the trunk of the car. We continue the procedu…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos