Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Toyota Auris

Model: Toyota Auris E150 - Years 2007-2012
Part: Tail light

To remove the rear light of a Toyota Auris, follow these steps. First, open the boot to access the inside of the light. You may need to remove the interior trim of the boot or door, depending on the model, to access the back of the light. Look for the fixing bolts around the perimeter of the light. Using an appropriate spanner, unscrew the bolts to remove the light from the car body. Once the bolts are removed, check for any electrical connectors attached to the light. Carefully disconnect them to completely free the light from the vehicle. The rear light should now be free to be removed. Extract it carefully to avoid damaging surrounding components, and you will have completed the removal.

Updated on 25 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear light from the Toyota Auris
How to remove the rear light from the Toyota Auris
Toyota Auris (2007-2012 / E150) Let's briefly go through the instructions that will allow you to remove and replace the rear light of the Toyota Auris, following these simple steps.…
How to disassemble the rear light and bumper of the Toyota Auris
How to disassemble the rear light and bumper of the Toyota Auris
Toyota Auris (2007-2012 / E150) Today we will discover the instructions that will allow us to disassemble and replace the rear taillight and bumper of the Toyota Auris. First, we op…
How to disassemble the rear light of the Toyota Auris
How to disassemble the rear light of the Toyota Auris
Toyota Auris (2012-2018 / E180) In this guide, we will see the instructions that will allow us to disassemble and replace the rear tail light and its bulbs of the Toyota Auris. Firs…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos