Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light and bumper of the Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the rear taillight and bumper of the Toyota Auris. First, we open the rear hatch of the car and start unscrewing the fixing screws found on the bottom of the taillight; we unscrew the internal screw and disconnect the electrical connector of the bulbs, then remove the rear taillight, as shown in the video.

At this point, we unscrew the screws located on both sides of the rear wheel arches, if we also want to proceed with the replacement of the bumper, following the video tutorial until the end!


Posted on 6 May 2025 by ScegliAuto


Related tutorials

How to remove the rear light from the Toyota Auris
How to remove the rear light from the Toyota Auris
Toyota Auris (2007-2012 / E150) Let's briefly go through the instructions that will allow you to remove and replace the rear light of the Toyota Auris, following these simple steps.…
How to disassemble the rear light of the Toyota Auris
How to disassemble the rear light of the Toyota Auris
Toyota Auris (2012-2018 / E180) In this guide, we will see the instructions that will allow us to disassemble and replace the rear tail light and its bulbs of the Toyota Auris. Firs…
Replacing the Rear Light of the Toyota Auris
Replacing the Rear Light of the Toyota Auris
Toyota Auris (2012-2018 / E180) In this video tutorial, you will see how to remove and replace the rear light of the Toyota Auris, following these simple and quick steps. First, ope…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos