Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : Replacement of the rear light of the Toyota Auris

Toyota Auris - Video tutorial

Model: Toyota Auris E180 - Years 2012-2018
Part: Tail light
Operation: Replacement of the rear light of the Toyota Auris

In this video tutorial, we will see how to disassemble and replace the rear light of the Toyota Auris, following these simple and quick steps. First, we open the rear trunk door and start unscrewing the two fixing screws of the rear light. Then, we pry on the sides to detach it from the body, disconnecting the electrical connector located on the back, as shown in the video. This way, it will be possible to replace the bulbs if necessary or even the entire light. We make the electrical connection and fix the light with the original screws!


Posted on 17 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos