Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Toyota Yaris 3

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Tail light

If you want to remove the rear light of your third-generation Toyota Yaris (2011-2019), follow the steps outlined in this mini guide. First, ensure the car is switched off for the entire operation. Go to the rear light, lift the boot, and unscrew the two screws present. Next, remove part of the rear bumper and unscrew the other two screws located just below. Finally, disconnect the electrical connector from the light and pull the light towards you.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of the Toyota Yaris
How to Remove the Rear Light of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) To change the rear light of the Toyota Yaris, use a 10 mm socket spanner to unscrew the panel holding the rear light unit to the car body. Now, take …
How to Replace the Key Battery of a Toyota Yaris
How to Replace the Key Battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…
How do you remove the rear taillight of the Toyota Yaris?
How do you remove the rear taillight of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to remove the rear light of the Toyota Yaris, you need to open the rear hatch so that you can detach the side trim panel of the trunk corres…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos