Do it yourself
Frequently asked questions about cars and motorcycles

What is the fuse diagram for the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuse box

If one or more devices in your Toyota Yaris suddenly stop working, the first thing to do is check the status of the respective fuses, the diagrams of which are indicated in this video. As shown, the first fuse box is located inside the cabin, specifically in the lower area of the dashboard on the driver's side. The second box is positioned in the engine compartment, just to the right of the battery. In case of a blown fuse, always ensure you use a replacement with the same specifications and operate with the vehicle turned off; otherwise, you may damage the various connected devices.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2005-2011 / Xp90) In this video, see the location of the fuse boxes and their diagrams for the Toyota Yaris, useful if you need to check the fuse for a malfunctioning …
Toyota Yaris (2011-2019 / Xp130) In this video, you can see the location of the fuse boxes for the Toyota Yaris and their respective diagrams, to consult in case you need to check th…
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will see the location of the fuse boxes and their respective diagrams in the Toyota Yaris, to consult in case a device is malfu…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer
    • Yaris 2005-2011 - What is the Toyota Yaris horn fuse? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos