Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Oil Filter on the Toyota Alphard

Model: Toyota Alphard Vellfire MK 2 - Years 2008-2015
Part: Engine oil

To change the oil and oil filter on the Toyota Alphard, start by lifting the car. Go underneath the vehicle, and with a wrench, unscrew the oil drain plug and let the oil drain into a container. Once the oil has drained from the oil pan, clean the area, unscrew the oil filter with the appropriate tool, and let the oil drain into a container while cleaning the area. Take the new oil filter, apply some new oil to the gasket and the filter. Now, screw the oil filter into place with the appropriate tool and tighten the oil drain plug. Next, go to the top of the vehicle, remove the oil fill cap, pour in the specified amount of oil, and when you are close to the indicated amount, check the level with the dipstick. If necessary, top off the oil; otherwise, close the oil fill cap.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the oil filter located on the Toyota Alphard?
Where is the oil filter located on the Toyota Alphard?
Toyota Alphard Vellfire (2015-2023 / MK 3) In this video, you can see where the oil filter is located on the Toyota Alphard and how to proceed if you need to replace it, a very simple operatio…
Where is the oil filter located in the Toyota Alphard?
Where is the oil filter located in the Toyota Alphard?
Toyota Alphard Vellfire (2015-2023 / MK 3) In this video we can see where the oil filter is located in the Toyota Alphard and how to proceed in case we need to replace it, an operation to be c…
How to Set the Clock on the Toyota Alphard?
How to Set the Clock on the Toyota Alphard?
Toyota Alphard Vellfire (2015-2023 / MK 3) To adjust the clock on the Toyota Alphard, turn on the instrument panel by inserting the ignition key into the corresponding slot: once the panel is …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos