Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil filter located on the Toyota Alphard?

Model: Toyota Alphard Vellfire MK 3 - Years 2015-2023
Part: Oil filter

In this video, you can see where the oil filter is located on the Toyota Alphard and how to proceed if you need to replace it, a very simple operation included in the oil change. As shown, the filter is positioned at the lower area of the engine, right in front of the oil pan. Before replacing it, you will need to drain all the oil in the system by unscrewing the appropriate bolt, after which you can unscrew the housing, remove it, and insert the replacement along with a new gasket. Once everything is reassembled, you can add the new oil through the designated hole.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the oil filter located in the Toyota Alphard?
Where is the oil filter located in the Toyota Alphard?
Toyota Alphard Vellfire (2015-2023 / MK 3) In this video we can see where the oil filter is located in the Toyota Alphard and how to proceed in case we need to replace it, an operation to be c…
Where is the Fuse Box in the Toyota Alphard 2?
Where is the Fuse Box in the Toyota Alphard 2?
Toyota Alphard Vellfire (2008-2015 / MK 2) In this new mini guide dedicated to your Toyota Alphard second generation (2008-2015), discover where the fuse box is located, giving you access to t…
How to Change the Oil and Oil Filter on the Toyota Alphard
How to Change the Oil and Oil Filter on the Toyota Alphard
Toyota Alphard Vellfire (2008-2015 / MK 2) To change the oil and oil filter on the Toyota Alphard, start by lifting the car. Go underneath the vehicle, and with a wrench, unscrew the oil drain…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos