Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Alphard Vellfire
  6. : How to reset the tire warning light on the Toyota Alphard?

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 3 - Years 2015-2023
Part: Tires
Operation: How to reset the tire warning light on the Toyota Alphard?

In this tutorial, we can see how to reset the tire warning light in the Toyota Alphard, an extremely simple and quick operation. Before doing this, we need to have restored the correct tire pressure following the instructions in the manual. Let's start by going inside the cabin, then insert the key and turn on the instrument panel, it is not necessary to start the engine. Next, we locate the button representing the warning light in question, located below the dashboard, on the driver's side, and hold it down for the necessary amount of time for the light to disappear from the panel.


Posted on 17 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos