Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror Cap on a Toyota Yaris Sedan

Model: Toyota Yaris Sedan Xp90 - Years 2005-2013
Part: Side mirror

In this brief video tutorial, you will see how to remove the cap of the exterior rearview mirror on a first-generation Toyota Yaris Sedan, produced from 2005 to 2013. This operation is very simple and can be done in just a few seconds independently, as shown in the video. Using a small lever, preferably plastic to avoid damaging the paint, start prying along the edge of the cap to release its mounting clips, then remove it and replace it with a new one.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box in a 2016 Toyota Yaris Sedan
Where to Find the Fuse Box in a 2016 Toyota Yaris Sedan
Toyota Yaris Sedan (2013-2020 / Xp150) In this new guide dedicated to your 2016 Toyota Yaris Sedan, we will discover together where all the various fuses in the car are located. First, par…
How to replace the reverse light bulbs in the Toyota Yaris Sedan?
How to replace the reverse light bulbs in the Toyota Yaris Sedan?
Toyota Yaris Sedan (2005-2013 / Xp90) In this tutorial, we can see how to replace the reverse light bulbs in the Toyota Yaris Sedan, a very simple and quick operation. First of all, make …
How to replace the remote battery of the Toyota Yaris Sedan?
How to replace the remote battery of the Toyota Yaris Sedan?
Toyota Yaris Sedan (2013-2020 / Xp150) As seen in this tutorial, replacing the remote battery of the Toyota Yaris Sedan is an extremely simple and quick operation. To do this, you will nee…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos