Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bumper

See other generations:
Video tutorial

In this video tutorial, you will see the steps to remove and replace the rear bumper on a Toyota Yaris. First, open the rear tailgate and start unscrewing all the fixing screws located on the sides using a 10 mm socket; then gently unclip the bumper from the sides, as shown in the video.

Next, remove the plastic clips found under the bumper to fully detach and remove it; replace it with the new one, applying the reverse procedure for reassembly!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the bonnet of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the front bumper to the chassis, loca…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
How to remove the rear bumper of the Toyota Yaris
How to remove the rear bumper of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Removing the rear bumper of the Toyota Yaris produced from 1999 to 2005 is a very simple and quick operation to perform independently. To carry out t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos