Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Toyota Yaris

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Rear bumper

Removing the rear bumper of the Toyota Yaris produced from 1999 to 2005 is a very simple and quick operation to perform independently. To carry out this operation, you will need to use a 10mm Torx key. Start the removal of the bumper by unscrewing the side screws using the Torx key. Continue the removal by detaching the plastic of the bumper from the fender and the bumper itself. Finish the removal by disconnecting the central connector of the bumper, for this operation you may need to use a rust remover spray. To mount the bumper once the work is completed, you will need to perform the same procedure but in reverse.

Posted on 10 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear bumper of the Toyota Yaris?
How do you remove the rear bumper of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to remove the rear bumper of the Toyota Yaris, you need to open the rear hatch of the car, so that you can locate the screws that secure the…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the bonnet of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the front bumper to the chassis, loca…
How to Remove the Rear Bumper from a Toyota Yaris
How to Remove the Rear Bumper from a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How do you dismantle the rear bumper of a Toyota Yaris? Follow these steps carefully. This operation is not too complex if done methodically. First, …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos