Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper from a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Rear bumper

How do you dismantle the rear bumper of a Toyota Yaris? Follow these steps carefully. This operation is not too complex if done methodically. First, use a screwdriver or battery-powered drill to unscrew the retaining screws at the top of the bumper, then remove the screws on the sides, and finally unscrew the retaining screws at the bottom of the bumper (between the chassis and the bumper). Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the bodywork (disconnect any power cables).

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (1999-2005 / Xp10) Removing the rear bumper of the Toyota Yaris produced from 1999 to 2005 is a very simple and quick operation to perform independently. To carry out t…
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
Toyota Yaris (2005-2011 / Xp90) Before you start, open the bonnet of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the front bumper to the chassis, loca…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos