Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Boxes in the Toyota RAV 4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Fuse box

If you need to work on the electrical system of the Toyota RAV4, it will be useful to know the location of the four fuse boxes in case you need to check or replace one of them. The first two are located inside the engine bay, one on the right next to the battery and the other on the left next to the wheel arch, protected by a cover that has a wiring diagram printed inside. The third is located at the bottom of the dashboard under the steering wheel on the left, also equipped with a printed diagram. The fourth is found in the boot, inserted in the left side panel, protected by a pressure-fitted cover.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the Fuse Boxes in the Toyota Rav4
Location of the Fuse Boxes in the Toyota Rav4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) If you need to work on the electrical system and components of the Toyota Rav4, it is useful to know the location of the fuse boxes. The first is loc…
Where are the Fuses Located in the Toyota RAV 4?
Where are the Fuses Located in the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The fuse boxes installed in the Toyota RAV 4 contain the fuses that regulate the operation of the devices present in the car: you will find two boxes…
Where Are the Fuses Located on the Toyota RAV 4?
Where Are the Fuses Located on the Toyota RAV 4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) On the Toyota RAV 4, all fuses are located within the designated fuse boxes inside the vehicle: this type of car has three boxes. The first is locate…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos