Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Factory Radio of the Toyota Avalon

Model: Toyota Avalon Xx30 - Years 2005-2012
Part: Car stereo

In this guide, you will find the main instructions to disassemble and replace the factory radio of the Toyota Avalon. First, get inside the vehicle and start by removing the plastic cover found on the sides of the dashboard next to the radio; then, disconnect the electrical connectors of the buttons, as shown in the video. Next, remove the screws from the radio, pulling it out of the dashboard; disconnect the wiring on the back to replace the radio with the new one, following the video tutorial to the end for reassembly!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box on the Toyota Avalon xx20?
Where is the Fuse Box on the Toyota Avalon xx20?
Toyota Avalon (2000-2004 / Xx20) Inside the Toyota Avalon produced from 2000 to 2004, there are two fuse boxes. The first fuse box is located inside the cabin, specifically behind th…
What is the fuse diagram for the Toyota Avalon?
What is the fuse diagram for the Toyota Avalon?
Toyota Avalon (2000-2004 / Xx20) In this video, you can see where the fuse boxes are located in the Toyota Avalon and their corresponding diagrams, to consult if you need to check th…
Where is the fuse box of the Toyota Avalon located?
Where is the fuse box of the Toyota Avalon located?
Toyota Avalon (2013-2018 / Xx40) In the following guide aimed at all of you who own a Toyota Avalon, we will discover the various steps you need to take if you intend to locate the f…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos