Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight bulb

See other generations:
Video tutorial

If you want to replace a headlight bulb on this model of car, the following description provides the operational procedures for carrying out the replacement, and you can also refer to the video. After opening the bonnet and locating the headlight with the bulb to be replaced, proceed to remove the plastic cap after disconnecting the electrical connector.

Next, remove the bulb by first releasing the steel pin. Then take the new bulb and position it in the headlight, reattach the pin, and finally reconnect the electrical connector.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a 2013 Toyota Yaris
How to Replace the Front Headlamp Bulb on a 2013 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) To correctly replace the front headlamp bulb on your 2013 Toyota Yaris, follow the steps outlined in this mini guide. First, park the car safely and …
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
Toyota Yaris (2020-2026 / MK 4) To replace the headlight bulb on the Toyota Yaris Hatchback, open the bonnet to access the interior of the corresponding headlight. Here, disconnect …
How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This short video will show you how to remove and replace the front headlight bulb on a Toyota Yaris, following these simple steps. First, open the bo…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos