Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aurion
    4. : How to replace the brake discs and pads of the Toyota Aurion.

Toyota Aurion - Video tutorial

Model: Toyota Aurion Xv40 - Years 2006-2012
Part: Brake discs
Operation: How to replace the brake discs and pads of the Toyota Aurion.

In this short guide, we will see the instructions that will allow us to disassemble and replace the front brake discs and pads of the Toyota Aurion. First, we lift the car and remove the front wheel; then we unscrew the brake caliper fixing screws, in order to remove it from the disc, thus removing the old pads. At this point, we unscrew the brake disc screws, installing the new one; we clean the caliper from dirt, pressing on the piston to make it retract. Now we install the new brake pads and the caliper, following the video to the end!


Posted on 26 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos