Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aurion
    4. : Toyota Aurion V6 serpentine belt replacement guide

Toyota Aurion - Video tutorial

Model: Toyota Aurion Xv40 - Years 2006-2012
Part: V-belt
Operation: Toyota Aurion V6 serpentine belt replacement guide

Let's see today in this short and simple guide how to disassemble and replace the serpentine belt or the V-belt of the Toyota Aurion with V6 engine. First of all, we open the bonnet of our car and begin to loosen the V-belt pretensioner, using a star or socket wrench; we then remove the old belt from the pulleys, as shown in the video. Now let's install the new serpentine belt, installing the original spare, inserting it perfectly between the pulleys and finally releasing the tensioner!


Posted on 2 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos