Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the poly v trapezoidal belt of the Toyota RAV 4 2.0

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: V-belt

The following steps will show us how to disassemble and replace the poly v multi-groove belt of the Toyota RAV 4 with a 2.0 engine. First, lift the vehicle and start loosening the tensioner with a wrench or socket wrench; then disconnect the belt from the various pulleys of the engine, as shown in the video. At this point, replace and correctly install the new original multi-groove belt, slowly turning the engine to verify its correct insertion; finally, lower the vehicle and start the engine!

Posted on 22 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Toyota RAV 4
How to Replace the External Wing Mirror on the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today, you will discover the steps and instructions that will allow you to remove and replace the external wing mirror on the Toyota RAV 4. First, op…
How to Replace the Alternator on a Toyota Rav 4?
How to Replace the Alternator on a Toyota Rav 4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To replace the alternator on a Toyota Rav 4, open the bonnet to access the screws securing the cover at the front of the engine bay. Once this is rem…
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Today, we will go through the instructions for removing and replacing the timing belt on the Toyota RAV 4. First, lift the vehicle and start by remov…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos