Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the pollen filter on Toyota Yaris XP10.

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Cabin air filter

In this video tutorial, we can see how to replace the pollen filter on a Toyota Yaris XP10, following a few simple steps. The first thing we need to do is to purchase a new pollen filter. The next step is to get into the car and turn off the engine, pull up the handbrake. The pollen filter on this car is located on the passenger side behind the glove compartment, so we open the passenger-side door, open the glove compartment, and remove all the material inside. Now we need to remove the glove compartment, so we do this by making a slight movement and pulling it towards us. Once the glove compartment is removed, we are faced with the filter box; remove the filter and clean the inside of the box with a compressor; position the new filter following the arrow indications according to the airflow.


Posted on 4 May 2023 by ScegliAuto



How to top up the coolant on a Toyota Yaris XP10
Toyota Yaris (1999-2005 / Xp10) In this video, we see how to refill the coolant tank of a Toyota Yaris XP10. The cap of the tank of this car is easily found by opening the front hoo
How to replace the air filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replacing the air filter on the Toyota Yaris 1.0 petrol is very simple. First, we need to open the hood of the car and remove the four clips that sec
Pollen filter replacement
Toyota Yaris (1999-2005 / Xp10) The pollen filter purifies the air in the passenger compartment and is located behind the glove box on the passenger side. Obtain the pollen filter o

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos