Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Oil Filter Located on the Toyota Yaris?

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you can see where the oil filter is located on the Toyota Yaris and how to proceed if you need to replace it. As shown, it is situated in the lower central area of the engine and is accessible only by going underneath the vehicle, taking all necessary precautions.

Once removed, you will need to drain all the oil contained within the engine and also unscrew the bolt from the drain hole, located on the right side.

After reassembling everything, you can add new oil through the upper fill hole.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace Oil and Filter on a Toyota Yaris
How to Replace Oil and Filter on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How to replace the engine oil and filter on a Toyota Yaris? In this video guide, learn how to proceed with the replacement. Open the car door and pul…
How to Remove the Oil Filter on a Toyota Yaris
How to Remove the Oil Filter on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack.…
How to Replace the Oil Filter on a Toyota Yaris
How to Replace the Oil Filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How do you replace the oil filter on a Toyota Yaris? Lift the car on a column lift and drain the used oil from the engine, then move on to removing t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos