Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Oil and Filter on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

How to replace the engine oil and filter on a Toyota Yaris? In this video guide, learn how to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard; lift the front bonnet.

Raise the car with a column lift. Using a socket spanner, unscrew the large securing bolt of the container where the oil filter is located.

Remove and extract the worn oil filter and position a new one; unscrew the bolt of the oil sump; allow the fluid to drain into a container. Finally, top up with the new fluid and close the front bonnet.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on a Toyota Yaris
How to Replace the Oil Filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How do you replace the oil filter on a Toyota Yaris? Lift the car on a column lift and drain the used oil from the engine, then move on to removing t…
How to change the oil and oil filter on a Toyota Yaris?
How to change the oil and oil filter on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To change the engine oil on a Toyota Yaris, you need to access the underside of the car: here you will find the oil drain plug. Open it with a spanne…
How to Remove the Oil Filter on a Toyota Yaris
How to Remove the Oil Filter on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack.…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos