Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the dipped beam bulbs in the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Headlight bulb

In this tutorial, you will see how to replace the dipped beam bulbs in the Toyota Corolla, a very simple and quick operation. First, ensure that the key is not inserted, then go to the relevant headlight, grasp the bulb holder located in the innermost area, and slightly rotate it counterclockwise to detach it from the lamp unit. Next, disconnect the old bulb, insert the replacement, and reassemble everything by following the reverse procedure. Avoid touching the glass of the new bulb directly with bare hands to prevent leaving any residue that could cause overheating.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing Bulbs on Toyota Corolla Verso
Changing Bulbs on Toyota Corolla Verso
Toyota Corolla (2006-2013 / MK 3) Let's look at removing the front headlamp bulbs on a Toyota Corolla Verso. First, open the front engine compartment, locate the caps that cover the f…
Where are the Dipped Headlight Fuses in the Toyota Corolla?
Where are the Dipped Headlight Fuses in the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) If the front headlights of your Toyota Corolla suddenly stop working and the bulbs are in good condition, first check the respective fuses, as shown …
How to Replace the Rear Headlight Bulbs in a Toyota Corolla?
How to Replace the Rear Headlight Bulbs in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Replacing the rear headlight bulbs in a Toyota Corolla is a straightforward task. First, remove the plastic rivets securing the inner panel in the bo…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos