Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienna
    4. : How do you replace the crankshaft position sensor on the Toyota Sienna?

Toyota Sienna - Video tutorial

Model: Toyota Sienna Xl30 - Years 2010-2020
Part: Crankshaft RPM sensor
Operation: How do you replace the crankshaft position sensor on the Toyota Sienna?

In order to replace the crankshaft position sensor on the Toyota Sienna, you need to open the hood so that you have access to the components located inside the engine compartment. In the front part of the engine compartment, just below the air conditioning compressor, you will be able to locate the sensor. The sensor should be pulled out from its housing and then disconnected from its corresponding connector. Now, you can connect the new sensor to the appropriate power cable and then check that everything is functioning correctly.


Posted on 9 November 2023 by ScegliAuto

Other guides that may interest you

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos