Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Your Car's Shock Absorbers

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shocks

See other generations:
Video tutorial

When your car has covered a significant number of miles, it is necessary to replace the shock absorbers, which serve to dampen the vehicle's bumps. The replacement procedure can be carried out without necessarily going to your trusted mechanic, thus saving money.

Lift the left side of the car with a jack and then remove the wheel, ensuring to take off all four bolts that hold it in place. Next, remove the screws located above the shock absorber and those on the driveshaft and the stabiliser parallel to the shock absorber.

This way, the shock absorber will come off easily.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorber
How to Replace the Rear Shock Absorber
Toyota Verso (2009-2018 / MK 4) Place the car on a ramp and lift it to a height that allows you to work comfortably. Remove the rear wheel corresponding to the shock absorber to be …
How to Install Universal Roof Bars on a Toyota Verso
How to Install Universal Roof Bars on a Toyota Verso
Toyota Verso (2009-2018 / MK 4) Here’s how to install universal roof bars on a Toyota Verso in detail. Universal roof bars are used on cars with and without roof rails (fixed bars s…
How to Remove and Replace the Fuel Filter on a Toyota Corolla
How to Remove and Replace the Fuel Filter on a Toyota Corolla
Toyota Verso (1995-2002 / MK 1) Learn how to remove and replace the fuel filter on a Toyota Corolla: lift the car on a column lift or access from the engine bay, locate the fuel fil…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos