Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Universal Roof Bars on a Toyota Verso

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Roof rack bars

See other generations:
Video tutorial

Here’s how to install universal roof bars on a Toyota Verso in detail. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car's roof).

Install the roof bar kit (as shown in the video) with the bars adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted (measure with a tape measure), tighten the pins with the butterfly bolt (if a lock is present) until they are fully secured to the roof rails.

Apply safety caps on both sides.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Fuse Box on a Toyota Verso?
Where to Find and How to Access the Fuse Box on a Toyota Verso?
Toyota Verso (1995-2002 / MK 1) The fuse box on your Toyota Verso is located behind the glove compartment of the front passenger side. Start by entering the cabin of your vehicle. N…
How to Replace the Bulb of the Rear Headlight of the Toyota Corolla Verso
How to Replace the Bulb of the Rear Headlight of the Toyota Corolla Verso
Toyota Verso (2004-2009 / MK 3) Today's guide will show you how to remove and replace the bulb of the rear headlight of the Toyota Corolla Verso by following the instructions below.…
How to Adjust the Handbrake on a Toyota Verso
How to Adjust the Handbrake on a Toyota Verso
Toyota Verso (2009-2018 / MK 4) You can adjust the handbrake on a Toyota Verso by removing the cover located at the rear of the corresponding lever: once this panel is removed, you …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos