Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Handbrake Cable on the Toyota Land Cruiser

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Parking brake

See other generations:
Video tutorial

The instructions below will show you the procedure for removing and replacing the handbrake lever cable on the Toyota Land Cruiser. First, get inside the vehicle and start by removing the plastic cover of the centre tunnel and then the handbrake lever; next, lift the vehicle to disconnect the handbrake cable from underneath, as shown in the video.

At this point, replace the old cable with the new one, and finally adjust the handbrake lever; reassemble all components of the centre tunnel.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / MK 10, J120) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…
How to change the time on the Toyota Land Cruiser
How to change the time on the Toyota Land Cruiser
Toyota Land Cruiser (2021-2026 / J300) In this short guide, we will see the instructions that will allow us to change the time of the Toyota Land Cruiser. First of all, we get into the car…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos