Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Toyota RAV 4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Fuel pump

To replace the fuel pump on the Toyota RAV 4, access the underside of the vehicle by unscrewing all the bolts that secure the tank to its housing: once all the support screws are loosened, you can completely detach the tank to access the pump located at its top. You will need to loosen the screws that secure the pump inside the tank, fully extracting it; at this point, you can insert the new pump into the top of the tank, securing it back in place.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump of the Toyota RAV4
How to replace the fuel pump of the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Below we will see the instructions that will allow us to disassemble and replace the fuel pump of the Toyota RAV 4 fuel tank. First, we open the rear…
How to Remove and Replace the Fuel Pump on a Toyota RAV 4
How to Remove and Replace the Fuel Pump on a Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In today's tutorial, you will learn how to remove and replace the fuel pump from the tank of a Toyota RAV 4, following the instructions below. First,…
Removing Fuel Pump on Toyota Rav 4
Removing Fuel Pump on Toyota Rav 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Is the fuel pump due for replacement? Here's how to remove it from the Toyota Rav 4. Lift and remove the rear seats of the car, and locate the cover …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos