Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sequoia
    4. : How to replace the battery of the Toyota Sequoia key

Toyota Sequoia - Video tutorial

Model: Toyota Sequoia Xk30, Xk40 - Years 2001-2007
Part: Key
Operation: How to replace the battery of the Toyota Sequoia key

If the key of your first-generation Toyota Sequoia has stopped working due to a completely exhausted battery, don't worry because to replace it you just need to follow a few simple steps that we will discover in this new guide dedicated to you. First of all, get yourself a new CR2450 button battery. Then remove the emergency key and disassemble the back cover of the car remote. At this point, remove the exhausted battery and replace it with the new one. Finally, reassemble the remote cover and you're done.


Posted on 25 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos