Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear light bulb of the Toyota Sequoia.

Model: Toyota Sequoia Xk30, Xk40 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light bulb

See other generations:
Video tutorial

If one of the bulbs in the rear light of your first-generation Toyota Sequoia has stopped working and you want to replace it yourself with a new one, you just need to follow the procedure below. First of all, purchase a new bulb compatible with your Toyota Sequoia, then also get a 10mm socket wrench and use it to unscrew the two screws located next to the light that you are replacing.

After unscrewing both, pull the light towards you and disconnect the electrical cable, then remove the rubber cap and proceed to replace the faulty bulb.


Posted on 27 November 2025 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery for the New Toyota Sequoia
How to Replace the Key Fob Battery for the New Toyota Sequoia
Toyota Sequoia (2022-2026 / Xk80) The procedure to replace the battery inside the key fob for the new Toyota Sequoia is nearly identical to that used in other Toyota models. Follow th…
How to Replace the Tail Light on a Toyota Sequoia
How to Replace the Tail Light on a Toyota Sequoia
Toyota Sequoia (2001-2007 / Xk30, Xk40) In this video, we will see how to replace the tail light on a 2001 Toyota Sequoia. The procedure is not complicated and can be the same for other sub…
How to change the battery of the Toyota Sequoia key
How to change the battery of the Toyota Sequoia key
Toyota Sequoia (2008-2022 / Xk60) The replacement of the battery of your Toyota Sequoia key is undoubtedly a very simple operation to carry out, and you can do it independently by fol…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos