Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sequoia
    4. : How to replace the rear taillight of Toyota Sequoia.

Toyota Sequoia - Video tutorial

Model: Toyota Sequoia Xk30, Xk40 - Years 2001-2007
Part: Tail light
Operation: How to replace the rear taillight of Toyota Sequoia.

In this video we will see how to replace the rear light of a 2001 Toyota Sequoia. The procedure is not complicated and can be the same for other later models, even if the rear lights may look slightly different. To remove the rear lights, the first thing to do is to open the rear hood. You will notice two bolts on each end that need to be removed. Once unscrewed, the block of the rear lights can be extracted. At this point, simply unscrew the lights by turning them slightly counterclockwise. We then replace the bulbs and screw everything back in.


Posted on 16 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos