Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sequoia
    4. : How to replace the Toyota Sequoia tailgate handle

Toyota Sequoia - Video tutorial

Model: Toyota Sequoia Xk30, Xk40 - Years 2001-2007
Part: Handle
Operation: How to replace the Toyota Sequoia tailgate handle

In the following video we will see an inexpensive trick to replace the tailgate handle of the 2003 Toyota Sequoia. As the video explains, it can happen that after years this handle can get damaged and therefore needs a change. In this case, the rear handle must first be extracted, leveraging the contour of the handle. Once it comes out, just replace the new handle making sure that a small cable comes out which will then be used to open the tailgate of the car. At this point the plate can be repositioned and screwed with the appropriate screws in the upper part, while in the lower hole the cable can be pulled out and used, as shown in the video, to open the tailgate.


Posted on 18 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos