Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on a Toyota RAV 4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Tire pressure warning light

The tire pressure sensor of the Toyota RAV 4 can be reset from the instrument panel by performing the following operations: first, you will need to inflate the tires to the recommended pressure value, which is indicated on the sticker attached to the driver's side door pillar. Once the tires have been inflated to the correct pressure, you can connect a diagnostic tool to the vehicle's OBD port, located under the steering column: this will allow you to select the error that is causing the tire pressure warning light to come on, and remove it completely.

Posted on 10 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Toyota RAV 4?
How to Reset the Tyre Pressure Warning Light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The procedure to reset the tyre pressure warning light on the Toyota RAV 4 involves inflating all the tyres to the recommended pressure: this value i…
How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The ignition of the tire pressure warning light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyot…
How to Reset the Tyre Pressure Warning Light on Toyota RAV 4?
How to Reset the Tyre Pressure Warning Light on Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) From the instrument cluster of the Toyota RAV 4, you can clear the tyre pressure warning light by inflating all the tyres to the correct pressure: th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos